The ice maker is a refrigeration mechanical device that generates ice by cooling water through an evaporator with the refrigerant of the refrigeration system. It uses a refrigeration system and takes water as a carrier to make ice by passing it through a certain device when powered on.

How to judge the hardware configuration of an ice machine:

1. Compressor

Whether an ice maker can be durable depends largely on its compressor. It is recommended to give priority to products equipped with large-brand compressors, which is better in cooling effect, energy consumption, stability, etc.;

2. Condenser

The double-row condenser will have a larger heat dissipation area than the single-row condenser, better heat dissipation effect, and higher ice-making efficiency;

3. Insulation layer

The ordinary foam insulation layer is not as good as the foam insulation layer. The foam insulation layer is the insulation layer used in refrigerators on the market now. It has a better cold-keeping effect and ice cubes are not easy to melt;

4. Capacity

In addition, another point to note when purchasing an ice maker is that the larger the capacity, the better.

Ice-making machines can be divided into commercial ice machine, household ice machine, and industrial ice machine. Ice machines should not be placed in an open-air environment. It is better to install them in a safe, clean, well-ventilated environment, and avoid direct sunlight and rain. When moving an ice machine, be careful and gentle to prevent severe vibration, and the carrying slope should not be less than 45 degrees.