Ice machine composition, operation, attention and food
Ice crusher main components ( see chart )
Ice crusher general operation procedure:
The use of ice machine matters needing attention:
Ice machine manufacturing food:
The main raw materials such as food production of ice:
Ice food making method:
Ice machine is the main component of
Ice crusher general operation procedure:
The use of ice machine matters needing attention:
Ice machine manufacturing food:
The main raw materials such as food production of ice:
Ice food making method:
Ice machine is the main component of
Ice crusher general operation procedure:
1, sand ice machine should be installed in the sufficient supporting force of the work table, and a proper distance with the ground.
In 2, before power on, first check the use of power supply voltage, and the voltage is consistent, the outlet is in compliance with safety standards, and has installed electrical leakage protection switch and receive good ground wire. Confirm all meet the electricity requirements.
In 3, before the start, the ice broke to a diameter of about 20 mm, can put in the barrel, top with convex feeding cylinder mouth is appropriate. Pay attention to the opening the power switch, the motor with a power disc rotation are allowed to board pneumatic materials pressing cover with handle is pressed downwards, then through the fastening rotary cutter blade on the ice to the shredding. But the operation handle is pressed downwards pressing cover when not too hard, so as not to damage the motor motor locked-rotor. And should pay attention to material is reduced after the ice margin, timely replenishment of the new ice block.
4, chopped ice particles, through the discharge opening into the dish. Be aware of blowdown smoothly, must not be blocked, otherwise it will cause death card cutter, burn motor. Such as the discovery of cutter is blocked, should be instituted immediately pressing cover with handle, closing the switch, pull the plug, the timely troubleshooting.
In 5, ice thickness can be adjusted by a blade mouth is convex cutter height to achieve, when adjusted to remove the protection switch device of the plastic disc, loosen the fixing pipe screw, pull out the barrel, and then release the cutter fastening screws, remove the knife disc, and then release the pressure screw blade, according to your requirements, installation in place, then in order to cutter mounted back to.
The use of ice machine matters needing attention:
1, to ensure safety, not allowed to directly with hand pressing ice block cutting.
2, each time after use, must be clean, clean should turn off the main power switch, pull the plug, and then use a clean towel dry machine on water. After cleaning, be sure to put the pressing cover handle file.
In 3, when cleaning, do not allow the use of cleaning agents, in order to prevent the residues in the machine the detergent pollution. Also not directly to wash with water, in order to avoid electrical components from moisture, affect the safe use and damage the machine.
In 4, the machine motor design for cutting rate of 80%, to avoid the long time continuous operation. In a continuous work after an hour, should be suspended for twenty minutes, before starting work. This will greatly prolong the service life of the motor.
5, whether it is cleaning, maintenance, replacement blade or clear ice slag and other related work, should turn off the power first, unplug the power plug; does not allow this long time running.
Ice machine manufacturing food:
The main raw materials such as food production of ice:
The main raw materials such as food production of ice:
1, nata de coco categories: can be pided into coconut flavor, pineapple coconut, coconut, coconut, strawberry grape, apple, peach litchi NATATE coco coconut coconut, coconut, melon coconut orange.
2, jam category: strawberry jam, jam, jam pineapple plum, plum jam, clear apple jam, kiwi jam, love jam.
3, crispy beans: can be pided into red beans, green beans, beans, black beans, yellow bowl of honey, silkworm island.
In 4, pearl milk round: big grain milk round, small milk round.
Ice food making method:
Ice food production methods: the ice in the ice machine planing into flakes in the pan, add 1-2 teaspoon ( mung bean, red beans, nuts can be preserved in the ice ), add 2 tablespoons of jam is.
The Black Pearl Snowflake Ice making method:
Ice in the ice machine planing into flakes in the bowl, cooked black pearl put 2 tablespoons of the shaved ice, add 2 tablespoons of jam, then add 1 tablespoons raisins, amount of condensed milk, topped with 1 tablespoons of fruit syrup is.
②strawberry snow ice making method:
Ice in the ice machine planing into flakes placed in small bowl, add 2 tbsp strawberry jam on the ice, then add the right amount of condensed milk is. ( the wind snow ice, snow ice pear plum flavors such as by replacing the jam to adjust the ingredients, method for making same )
The red bean with milk ice making method: put ice in ice machine planing into flakes in the bowl, add 2 tablespoon of stew ripe red bean ice, adding proper amount of condensed milk pour 2 tablespoons of fructose is. ( mung bean milk ice and method of making same )
The eight-treasure ice making method:
The ice in the ice machine, planer into flakes in the bowl, adding proper amount of eight-treasure porridge to the shaved ice, adding proper amount of condensed milk pour 1 tablespoons of fructose is.
⑤abrin ice making method:
The ice in the ice machine, planer into flakes placed in small bowl, add 2 tablespoons of red beans to the shaved ice, add 2 tablespoons of red beans, add the right amount of condensed milk pour 1 tablespoons of fructose is.
The egg pudding ice making method:
The ice in the ice machine, planer into flakes in the shape of the bowl, the pudding cuts on ice, add 1 tablespoons raisins, adding proper amount of condensed milk, 1 tbsp sugar pour into.
The pearl fruit ice: all kinds of fruit were washed, peeled, cut into small pieces of ice cover plate, slag, pour 2 tablespoons of pearl, plus shower fruit syrup namely, mix well, nutritious and delicious.
Previous: No Information
Next: The FAI climbed 5.9 percent year-on-year in the first 11