The ice shape of snow flake ice making machine is a relatively humid, and the temperature is slightly lower than zero, with good plasticity, which is easy to take and accumulate. The ice is made in the shape of amorphous fine particle snowflake-shaped crushed ice, which can penetrate into a narrow gap, has a fast cooling speed and a good ice bath effect. It is specially designed for laboratories.

Snowflake ice machine installation precautions:

1. Do not use it in the open air, and avoid places that are wet or easily exposed to water;

2. It should be put in a place with no corrosive gas and good ventilation to ensure that the machine has good ventilation and heat dissipation;

3. When the ice maker is in place, it should be stable. For the first use, it should be put there for about 10 hours before operation;

4. The drain pipe should be lower than the box to facilitate smooth drainage;

5. It is not allowed to pull the temporary line, and a fixed power socket should be installed;

6. The ambient temperature should be around 5~35°C.

Snowflake ice maker is a kind of refrigeration process in which water is passed through a fully automatic controlled water tank to control the flow of water and a certain water level, and then passes through a double-screw evaporator, which is cooled by the refrigeration system and mixed with ice water to produce a relatively low water content. It is especially suitable for use in laboratories of life science, medicine, agriculture, forestry, animal husbandry and fishery, inspection and quarantine.